Combination Hammer : HR2810 28mm (1-1/8") Adapted for SDS-PLUS bits.
3 operation modes - hammering, hammering with rotation, rotation.
- Highest-in-class efficiency in both drilling and chipping.
- Compact L-shaped motor housing.
- One-touch sliding chuck enables easy bit changes.
- Ergonomically designed handle with rubberized soft grip provides more
control and comfort.
- Carbon brush : CB-325

9533 Angle Grinder 100mm (4")
Easy-to-grip slim housing of diameter 56mm.
- Powerful and durable motor 720W. (in Power input)
- Effective vent slits for better cooling and dust prevention.
- Thicker Wire Field for; Effective flow of electricity, less heat gener
ation, higher durability.
Specification:
- Continuous rating Input 720W
- Capacity
Depressed center wheel 100mm (4"")
Wire cup brush 75mm (3"")
Abrasive disc 100mm (4"")
Diamond wheel 110mm (4-3/8"")
- No load speed 12,000rpm
- Dimensions (L x W x H) 262 x 118 x 104mm
- Net weight 1.4kg (3.1lbs)
- Power supply cord 2.5m (8.2ft)
Standard Equipment:
- Depressed Center Wheel
- Lock Nut Wrench
(CB-411)

9533B Angle Grinder 100mm (4")
Easy-to-grip slim housing of diameter 56mm.
- Powerful and durable motor 720W. (in Power input)
- Effective vent slits for better cooling and dust prevention.
- Thicker Wire Field for; Effective flow of electricity, less heat gener
ation, higher durability.
- Double insulation
Specification:
- Continuous rating Input 720W
- Capacity
Depressed center wheel 100mm (4")
Wire cup brush 75mm (3")
Abrasive disc 100mm (4")
Diamond wheel 110mm (4-3/8")
- No load speed 12,000rpm
- Dimensions (L x W x H) 262 x 118 x 104mm
- Net weight 1.4kg (3.1lbs)
- Power supply cord 2.5m (8.2ft)
Standard Equipment:
- Depressed Center Wheel
- Lock Nut Wrench
(CB-411)

9533B Angle Grinder 100mm (4")
Easy-to-grip slim housing of diameter 56mm.
- Powerful and durable motor 720W. (in Power input)
- Effective vent slits for better cooling and dust prevention.
- Thicker Wire Field for; Effective flow of electricity, less heat gener
ation, higher durability.
- 9,000rpm lower speed guarantees higher torque for tough concrete cutti
ng.
- Double insulation
Specification:
- Continuous rating Input 720W
- Capacity
Depressed center wheel 100mm (4")
Wire cup brush 75mm (3")
Abrasive disc 100mm (4")
Diamond wheel 110mm (4-3/8")
- No load speed 9,000rpm
- Dimensions (L x W x H) 262 x 118 x 104mm
- Net weight 1.4kg (3.1lbs)
- Power supply cord 2.5m (8.2ft)
Standard Equipment:
- Depressed Center Wheel
- Lock Nut Wrench
(CB-411)

9533L Angle Grinder 100mm (4")
Easy-to-grip slim housing of diameter 56mm.
- Powerful and durable motor 720W. (in Power input)
- Effective vent slits for better cooling and dust prevention.
- Thicker Wire Field for; Effective flow of electricity, less heat gener
ation, higher durability.
- 9,000rpm lower speed guarantees higher torque for tough concrete cutti
ng.
Specification:
- Continuous rating Input 720W
- Capacity
Depressed center wheel 100mm (4"")
Wire cup brush 75mm (3"")
Abrasive disc 100mm (4"")
Diamond wheel 110mm (4-3/8"")
- No load speed 9,000rpm
- Dimensions (L x W x H) 262 x 118 x 104mm
- Net weight 1.4kg (3.1lbs)
- Power supply cord 2.5m (8.2ft)
Standard Equipment:
- Depressed Center Wheel
- Lock Nut Wrench
(CB-411)

Field-proven, reliable performance from handy and lightweight body.
- Wide swath of 82mm (3-1/4"), long rear shoe and handy edge fence.
- Equipment : Sharpening Holder Assembly, Blade Gauge Assembly, Socket
Wrench, Planer Blade, Edge Fence (Guide Rule)
Continuous rating Input 750W
Planing width 82mm (3-1/4")
Planing depth 3mm (1/8")
No load speed 16,000rpm
Overall length 415mm (16-3/8")
Net weight 4.9kg (10.8lbs)
Power supply cord 5.0m (16.4ft)

Powerful motor in rugged aluminum body.
- With an optional edge fence, also provides fine bevel planing at 32,00
0
cuts per minute.
- Sharpening Holder Assembly, Triangular Rule, Socket Wrench, Planer
Blade
Continuous rating input 750W
Planing width 80mm (3-1/8")
Planing depth 3mm (1/8")
No load speed (rpm) 16,000
Net weight 5.3 kg. (11.8 lbs)
Power supply cord 5.0m (16.4 ft.)

Rugged aluminum housing and easy depth settings.
- Planes up to 136mm (5-3/8") wide and 3mm (1/8")deep in a single pass.
- Precision machined aluminum base for planing accuracy.
- Equipment: Sharpening Holder Assembly, Blade Gauge Assembly, Socket
Wrench, Planer Blade
Continuous rating input 960W
Planing width 136mm (5-3/8")
Planing depth 3mm (1/8")
No load speed (rpm) 16,000
Overall length 445mm (17-1/2")
Net weight 7.9 kg. (17.4 lbs)
Power supply cord 5.0m (16.4 ft)